Husqvarna RC 318T Workshop Manual

26 – English
Assembly
Assemble the engine in opposite sequence.
NOTE: Hold the battery cable screws in place so
that the electrodes are not strained.
NOTE: When tting the engine, it is important
that the groove of the belt pulley, (A) is in such a
postion that the outgoing shafts key (B) ts into
the groove. Also make sure that both the spac-
ing tube (C) and key (B) are attached correctly to
the engine shaft.
Grease the engine shaft.
11. Use the 506 66 48-01 puller if needed.
506 66 48-01
12. Remove the engine xtures. 2 on each side of the
engine.
13. Remove the engine.
Propulsion
AA
B
C

Husqvarna RC 318T Specifications

General

Brand	Husqvarna
Model	RC 318T
Category	Lawn Mower
Language	English