What to do if the alarm light is lit after testing a Hussmann Refrigerator?
If the alarm light remains lit after completing a test on your Hussmann Refrigerator, the test is completed. Power off the unit and reinstate control.
What to do if there is Alarm Board Failure at 32 X2 in Hussmann Refrigerator?
In case of an Alarm Board Failure at 32 X2 in your Hussmann Refrigerator, press the Bell Stop Switch. Then proceed according to section 11.
What to do if there is Alarm Board Failure at A9 Light in Hussmann Refrigerator?
In the event of an Alarm Board Failure at A9 Light in your Hussmann Refrigerator, proceed according to section 8.
Discusses floor support, ventilation, drains, and working space for equipment.
Explains the fundamental stages of the refrigeration cycle, from compression to condensation.
Explains the process of refrigerant flow during the Koolgas defrost cycle.
Describes injecting refrigerant into the suction cavity for compressor temperature control.
Guidelines for routing liquid and suction lines, including expansion and P-traps.
Guidelines for sizing suction and liquid lines for branch piping.
Details on how Super Plus components are wired at the factory and in the field.
Details the function and operation of the single phase power monitor.
Steps to check condenser electrical connections and fan operation before start-up.
Explains Evaporator Pressure Regulator Valves and their function.
Details the Thermal Expansion Valve's role in regulating refrigerant flow.
Operation of the system designed to inject refrigerant for compressor temperature control.
Provides pressure settings for EPR controls based on evaporator temperature.
Settings and adjustments for Alco Low Pressure Controls.
Discusses floor support, ventilation, drains, and working space for equipment.
Explains the fundamental stages of the refrigeration cycle, from compression to condensation.
Explains the process of refrigerant flow during the Koolgas defrost cycle.
Describes injecting refrigerant into the suction cavity for compressor temperature control.
Guidelines for routing liquid and suction lines, including expansion and P-traps.
Guidelines for sizing suction and liquid lines for branch piping.
Details on how Super Plus components are wired at the factory and in the field.
Details the function and operation of the single phase power monitor.
Steps to check condenser electrical connections and fan operation before start-up.
Explains Evaporator Pressure Regulator Valves and their function.
Details the Thermal Expansion Valve's role in regulating refrigerant flow.
Operation of the system designed to inject refrigerant for compressor temperature control.
Provides pressure settings for EPR controls based on evaporator temperature.
Settings and adjustments for Alco Low Pressure Controls.
General| Brand | Hussmann |
|---|---|
| Model | Super Plus |
| Usage | Commercial |
| Voltage | 115V |
| Hertz | 60 Hz |
| Phase | 1 |
| Shelves | Adjustable |
| Defrost Type | Automatic |
| Refrigerant | R-404A |
| Lighting | LED |
| Exterior Finish | Stainless Steel |
| Dimensions | Varies by model |
| Door Type | Solid or Glass (varies by model) |
To Next Page
