Warranty Information: 12-2
VACUUM AND SOLUTION HOSES
• Failure to protect hoses against freezing.
• Failure to protect hoses against burns from engine and blower exhaust.
• Damage to hoses from being run over by vehicles.
• Kinking or cracking from failure to store or unroll hoses correctly.
• Normal wear and tear from everyday use.
CLEANING WAND AND TOOL
• Failure to protect against freezing.
• Obvious physical abuse of wand or tool.
WATER HEATING SYSTEM
• Over-pressurization of the system (recommended maximum working
pressure -
1,200 psi).
• Failure to protect against freezing.
HARD WATER DEPOSITS
• Failure to use or maintain a water softening system or a properly installed magnetic-
type descaler, whichever might be necessary, with machines operating in designated
“Hard Water Areas” (3.5 grains or more per gallon).
WARRANTY PROCEDURE
Warranty coverage is available to you through your local distributor.
If you have moved to a new area or have purchased a used machine and need information
regarding your local distributor, call HydraMaster at (425) 775-7272 or email us at:
custsvc@hydramaster.com.
When calling your distributor, be sure to have the machine’s information; model and serial
number, ready for the service representative.
FOR YOUR REFERENCE:
Model No. _____________________________________________________
Serial No. _____________________________________________________
Date of Purchase: ______________________________________________
Purchased From (Distributor): ____________________________________
To Next Page
Loading...
