General Information: 1-6
MACHINE SPECIFICATIONS
Frame 23” W x 41.5” H x 61.0” L
Weight 650 lbs (tank and console only)
Construction Tank Marine aluminum with baked-on epoxy nish
Chassis painted steel
Cowling, berglass
Power Transfer Electric clutch-driven shaft, key activated
Vacuum Blower 4007 Tuthill/M-D Tri-Lobe
Water Pump Plunger pump, 4.0 gpm (at high speed), 1,200 operating psi, electric
clutch control
Chemical
System
Last-step chemical injection, meter controlled
Heating System Engine heat recovery, multi-parallel heat exchanger system, optional
Salsa heat package
Instruments
Main Panel Electronic tachometer, 0-3,500 rpm
Water temperature gauge, 0-320 degrees F
Vacuum gauge, 0-30” hg
Hour meter, machine run-time
Keyed ignition, start/stop
Electronic circuit protection breaker, resettable
Machine status indicator lamps
Chemical owmeter, 0-10 gph
Solution pressure gauge, liquid lled, 0-1,500 psi
Side Panel Water pressure adjustment
Blower lubrication port
Solution temperature control selector
High pressure solution outlets, quick-disconnect
Fresh water inlet tting, quick-disconnect
Water box drain valve
Chemical controls
To Next Page
Loading...
