This is what the display looks like when Station 4 is set for 10
minutes:
Repeat this pattern of selecting a station to manually water for
the desired amount of time until complete.
Manual irrigation starts immediately on the first station that had
a time entered.
There are 9.9 minutes remaining on Station 4. When irrigation
has finished on this station, the screen will change to this:
Note: In manual operation, the controller will run the stations in
their numerical order, which may not be the order in which they
were entered.
Manual Water All Stations
1. Turn the Function Selector knob to MANUAL.
The display will look like this:
To Next Page
Loading...