Hypertherm Powermax 85

SPECIFICATIONS
powermax 65/85 Service Manual 1-3
Where to find information
System specifications such as size, weight, detailed electrical specifications, and cut speeds can be found in this
section. For information on:
• Setup requirements, including power requirements, grounding, power cord configurations, extension cord
requirements, and generator recommendations — see Section 2, Power Supply Setup.
• Handheld and machine torch consumables, cut charts, and torch setup information — see Section 3, Torch
Setup.
• Information about the controls and LEDs, steps for system operation, and hints for improving cut quality — see
Section 4, Operation.
• Maintenance and repair — see Section 5, Troubleshooting and System Tests.
• Replacing components — see Section 6, Component replacement
• Part numbers and ordering information for accessories, consumables, and replacement parts — see Section 7,
Parts.
• Timing and schematic diagrams — see Section 8, Wiring diagrams