Need help?Do you have a question about the Hypertherm Powermax 85 and is the answer not in the manual?
General| Gas Supply | Clean, dry, oil-free air or nitrogen |
|---|---|
| Cooling Method | Fan-cooled |
| Input Voltage | 200-600V, 3-phase |
| Current Output | 25-85 A |
| Duty Cycle | 60% @ 85 A |
| Recommended Gas Inlet Flow Rate/Pressure | 6.7 scfm @ 85 psi |
| Cutting Capacity (Recommended) | 1" (25 mm) |
| Gas Type | Air/Nitrogen |
To Next Page
