Install and Set Up the Plasma Power Supply
24 811470 Operator Manual Powermax45 SYNC
International Electrotechnical Commission (IEC) symbols
The following symbols can appear on the data plate, control labels, switches, and light-emitting
diodes (LEDs).
Direct current (DC)
Alternating current (AC)
Plasma torch cutting
Gouging
AC input power
connection
The terminal for the
external protective (earth)
conductor
I
Power is ON
O
Power is OFF
An inverter-based power
source, either 1-phase or
3-phase
Volt/amperage curve,
“drooping” characteristic
To Next Page
Loading...
