Powermax45 SYNC Operator Manual 811470 77
Gouge with the Hand Torch
Gouge with the hand torch
Hypertherm offers the following gouging cartridge, which you can use with both the 15° and the 75°
SmartSYNC hand torches.
For a full list of cartridges available for the Powermax45 SYNC, refer to the
Powermax45/65/85/105 SYNC Parts Guide (810490).
WARNING
SPARKS AND HOT METAL CAN INJURE EYES AND BURN SKIN
When firing the torch at an angle, sparks and hot metal will spray out from the torch tip.
Point the torch away from yourself and others. Always put on correct protective equipment
including gloves and eye protection.
Cartridge Type Purpose
Maximum Removal
gouging
(green)
Use these cartridges for aggressive metal
removal, deep gouge profiles, and extreme
metal washing.
A faster gouging speed is recommended to
control the concentrated plasma arc.
To Next Page
Loading...
