Hypertherm Powermax45 SYNC - Find System Specifications on the Data Plate

Install and Set Up the Plasma Power Supply
2
Powermax45 SYNC Operator Manual 811470 21
Find system specifications on the data plate
The data plate on the bottom of the plasma power supply contains 2 sets of ratings:
 The HYP ratings are Hypertherm plasma power supply ratings. They show the capability of
the system related to Hypertherm’s internal testing.
 The IEC ratings are the minimum ratings that the system must get to meet the requirements
of IEC standard 60974-1.
CSA and CE/CCC data plates have small differences. This sample is a CSA data plate.
1
2
3
4
1 Serial number, bar code, and date made
2 Plasma cutting ratings
3 Plasma gouging ratings
4 Plasma power supply ratings
HYP = Hypertherm internal rating
IEC = International Electrotechnical Commission
rating
I
1
= Input current (A)
I
2
= Conventional welding current (A)
PF = Power factor
U0 = Rated no load voltage (V)
U1 = Input voltage (V)
U2 = Conventional welding voltage (V)
X = Duty cycle (%)