Hypertherm Powermax45 SYNC - Maximum Cut Speeds (Mild Steel)

Install and Set Up the Plasma Power Supply
2
26 811470 Operator Manual Powermax45 SYNC
Maximum cut speeds (mild steel)
Maximum cut speeds are the results of Hypertherm’s laboratory testing. Actual cutting speeds may
be different for different cutting applications.
Gouge capacity (mild steel)
Material thickness Maximum cut speed
6mm (1/4inch) 2286mm/min (90in/min)
9 mm (3/8 inch) 1219 mm/min (48 in/min)
12 mm (1/2 inch) 762 mm/min (30 in/min)
16 mm (5/8 inch) 508 mm/min (20 in/min)
19 mm (3/4 inch) 330 mm/min (13 in/min)
25 mm (1 inch) 178 mm/min (7 in/min)
Process Output currentMetal removal rate
Maximum Removal gouging (26 A – 45 A) 45 A 3.4 kg/hour (7.5 lb/hour)