167
Appendix
Slider type
Table type
Model
Stroke (mm) and maximum speed (mm/sec) (Note 1)
Load capacity (Note 2)
Rated acceleration
Horizontal Vertical Horizontal
Vertical
Model
Stroke (mm) and maximum speed (mm/sec) (Note 1)
Rated acceleration
Horizontal Vertical Horizontal
Vertical
Load capacity (Note 2)
(Note 1) The figure in the elongated circle indicates the maximum speed for each stroke
The figure in parentheses applies to vertical operation.
(Note 2) The load capacity is based on actuator operation at the rated acceleration.
(Note 3) Also refer to the specification pages in the catalog and operation manual of the
applicable actuator.
(Note 4) The maximum speed specified above may not be reached if the stroke is short
or depending on the distance traveled.
To Next Page
Loading...
