Table 1. Service Processor Checkpoints. (continued)
Checkpoint Description Action/ Possible Failing FRU
E0C0 Starting X5 BIST See “Error Codes E0A0, E0B0, E0C0,
E0E0, E0E1 and 40A00000 Recovery
Procedure” on page 177.
E0D0 Creating JTAG scanlog (This procedure
could take several minutes.)
Call support
E0E0 Pulling processor card out of the reset
state.
See “Error Codes E0A0, E0B0, E0C0,
E0E0, E0E1 and 40A00000 Recovery
Procedure” on page 177.
E0E1 Pull processor card out of reset: okay See “Error Codes E0A0, E0B0, E0C0,
E0E0, E0E1 and 40A00000 Recovery
Procedure” on page 177.
OK Service Processor Ready. Waiting for
power-on normal operation
Press the system unit’s power button to
power-on the system unit.
STBY Service processor is ready. The
operating system has been terminated;
the system is still powered on.
This usually indicates an operating
system crash. The service processor
menus are available. Look for error
codes related to the operating system
crash in the service processor error log.
Chapter 4. Checkpoints
91
To Next Page
Loading...
