Table 3. Firmware Error Codes. (continued)
Error Code Description Action / Possible Failing FRU
29A00004 Keyboard stuck key test failed. 1. Keyboard
2. Replace the system board.
Location: P1
(See note 3 on page 115.)
29B00004 Mouse not present/detected. 1. Mouse
2. Replace the system board.
Location: P1
(See note 3 on page 115.)
2B2xxx11 Processor is manually disabled Use service processor menus to
re-enable the processor, then reboot
the system. (See error code 2B2xxx22
on page 132 for xxx definition.)
2B2xxx22 Processor disabled. Replace processor card.
Location: P1-C1
Location: P1-C2
Note: Where xxx indicates the
processor type as follows:
711 333Mhz processor with 1
MB of L2 cache.
7D4 400Mhz processor with 4
MB of L2 cache.
758 450 MHz processor with 8
MB of L2 cache
2B2xxx31 Processor failed. Replace processor card.
Location: P1-C1
Location: P1-C2
See error code 2B2xxx22 on page
132 for xxx definition.
2B2xxx42 Unsupported processor type. Replace processor card.
Location: P1-C1
Location: P1-C2
See error code 2B2xxx22 on page
132 for xxx definition.
2BA00000 Service processor POST failure. 1. Unplug the system power cable
and wait until the system power
indicator remains off and the
operator panel is blank.
2. Plug in the system power cable
and retry the operation.
3. Replace the system board.
Location: P1
(See note 3 on page 115.)
132 Service Guide
To Next Page
Loading...
