Selecting the Adapter Parameters option allows you to view an adapter’s hardware
address, as well as configure network adapters that require setup. A screen similar to
the following displays.
Device Slot Hardware Address
1. ethernet 3 0004AC5E08D2
2. token-ring 5 0020357A0530
3. ethernet Integrated 0004ACE4020B
--------------------------------------------------------------------------------------------------
Navigator keys:
M = return to main menu
ESC key = return to previous screen X = eXit System Management Services
--------------------------------------------------------------------------------------------------
Type the number of the menu item and press Enter or Select a Navigator key: _
Selecting an adapter on this screen displays configuration menus for that adapter:
10/100 Ethernet TP PCI Adapter
1. Data Rate (Currently Auto)
2. Full Duplex (Currently Yes)
--------------------------------------------------------------------------------------------------
Navigator keys:
M = return to main menu
ESC key = return to previous screen X = eXit System Management Services
--------------------------------------------------------------------------------------------------
Type the number of the menu item and press Enter or Select a Navigator key: _
244 Service Guide
To Next Page
Loading...
