Component Name AIX Location Code
Physical Location
Code Logical Identification
Battery
Battery P1-V2
System VPD module
System VPD module L1-N1
Notes:
1. The physical location code for the PCI slots, when empty, uses the P1/Ix notation, where the
’/’ identifies an integrated device (in this case the empty slot). A PCI device plugged into the
slot uses the P1-Ix notation, where the ’-’ identifies a plugged device.
2. The SCSI bus IDs are the recommended values. The SCSI IDs shown for media devices
indicate how the devices are set when they are shipped from the factory. Field installations
may not comply with these recommendations.
Chapter 1. Reference Information
21
To Next Page
Loading...
