IBM N Series Hardware Guide

Chapter 21. Hardware and software upgrades 303
Example 21-4 sysconfig command
N6070A> sysconfig -a
Data ONTAP Release 7.3.7: Thu May 3 04:32:51 PDT 2012 (IBM)
System ID: 0151696979 (N6070A); partner ID: 0151697146 (N6070B)
System Serial Number: 2858133001611 (N6070A)
System Rev: A1
System Storage Configuration: Multi-Path HA
System ACP Connectivity: NA
slot 0: System Board 2.6 GHz (System Board XV A1)
Model Name: N6070
Machine Type: IBM-2858-A21
Part Number: 110-00119
Revision: A1
Serial Number: 702035
BIOS version: 4.4.0
Loader version: 1.8
Agent FW version: 3
Processors: 4
Processor ID: 0x40f13
Microcode Version: 0x0
Processor type: Opteron
Memory Size: 16384 MB
Memory Attributes: Node Interleaving
Bank Interleaving
Hoisting
Chipkill ECC
CMOS RAM Status: OK
Controller: A
Remote LAN Module Status: Online
To verify the existing firmware level, use the version -b command, as shown in
Example 21-5.
Example 21-5 The version command
n5500-ctr-tic-1> version -b
1:/x86_elf/kernel/primary.krn: OS 7.3.7
1:/backup/x86_elf/kernel/primary.krn: OS 7.3.6P5
1:/x86_elf/diag/diag.krn: 5.6.1
1:/x86_elf/firmware/deux/firmware.img: Firmware 3.1.0
1:/x86_elf/firmware/SB_XIV/firmware.img: BIOS/NABL Firmware 3.0
1:/x86_elf/firmware/SB_XIV/bmc.img: BMC Firmware 1.3
1:/x86_elf/firmware/SB_XVII/firmware.img: BIOS/NABL Firmware 6.1
1:/x86_elf/firmware/SB_XVII/bmc.img: BMC Firmware 1.3
You can also use the license command to verify what software is licensed on the system.
(This example cannot be shown because of confidentiality.)
Next, review all necessary documentation, including the Data ONTAP Upgrade Guide and
Data ONTAP Release Notes for the destination version of Data ONTAP, which are available
from the following IBM support website:
http://www.ibm.com/storage/support/nas

IBM N Series Specifications

General

Brand	IBM
Model	N Series
Category	Storage
Language	English