Appendix A. Getting started 325
c. In the WinZip dialog box, enter the letter of the drive to which you mapped the storage
system. For example, if you chose drive Y, replace DRIVE:\ETC with the following path,
as shown in Figure A-6:
Y:\ETC
Figure A-6 Extract path
d. Ensure that the following options were selected:
• Overwrite files without prompting
• When done unzipping open
Leave the options as they are.
e. Click Unzip. A window displays the confirmation messages as files are extracted, as
shown in Figure A-7.
Figure A-7 Extraction finished
f. Run the script installer, as shown in Figure A-8.
Figure A-8 Script installer
To Next Page
Loading...
Need help?
General