212 IBM eX5 Implementation Guide
In a BladeCenter S chassis, the CFFh I/O expansion card requires a supported switch
module in bay 2. When used in a BladeCenter S chassis, a maximum of two ports are routed
from the CFFh I/O expansion card to the switch module in bay 2.
See the IBM BladeCenter Interoperability Guide for the latest information about the switch
modules that are supported with each CFFh I/O expansion card at the following website:
http://www.ibm.com/support/docview.wss?uid=psg1MIGR-5073016
5.14 Standard onboard features
This section describes the standard onboard features of the HX5 blade server:
UEFI
Onboard network adapters
Integrated systems management processor called Integrated Management Module (IMM)
Video controller
Trusted Platform Module (TPM)
5.14.1 UEFI
The HX5 2-socket uses an integrated Unified Extensible Firmware Interface (UEFI)
next-generation BIOS.
The UEFI provides the following capabilities:
Human readable event logs; no more beep codes
Complete setup solution by allowing adapter configuration function to be moved to UEFI
Complete out-of-band coverage by Advanced Settings Utility to simplify remote setup
Using all of the features of UEFI requires an UEFI-aware operating system and adapters.
UEFI is fully backward-compatible with BIOS.
For more information about UEFI, see the IBM white paper, Introducing UEFI-Compliant
Firmware on IBM System x and BladeCenter Servers, which is available at the following
website:
http://www.ibm.com/support/docview.wss?uid=psg1MIGR-5083207
For the UEFI menu setup, see 8.5, “UEFI settings” on page 396.
5.14.2 Onboard network adapters
The HX5 2-socket includes a dual-port Gigabit Ethernet controller with the following
specifications:
Broadcom BCM5709S dual-port Gigabit Ethernet controller
Support for TCP Offload Engine (TOE)
Support for failover and load balancing for better throughput and system availability
Support for highly secure remote power management using Intelligent Platform
Management Interface (IPMI) 2.0
Support for Wake on LAN and Preboot Execution Environment (PXE)
Support for IPv4 and IPv6