IBM System x3850 X5 Implementation Guide

458 IBM eX5 Implementation Guide
Figure 9-9 System Status Summary page
All high-level tasks that can be performed against the various components within the
BladeCenter chassis are shown in the left pane, as highlighted in Figure 9-9. Of particular
importance to this IBM Redbooks publication is the Scalable Complex section. In the Scalable
Complex section, you can configure the HX5 blades to form 2-node scalable systems. We
describe the scaling configuration of the HX5s in 8.6, “Creating an HX5 scalable complex” on
page 402.
For more information about the AMM and its configuration, see the IBM BladeCenter
Advanced Management Module Installation Guide at the following website:
http://ibm.com/support/entry/portal/docdisplay?lndocid=MIGR-5073392
9.3.2 Service Advisor
The AMM contains a component called the Service Advisor that allows the chassis to
automatically notify IBM service and support of select hardware issues. When a serviceable
event that has been designated as a call home event is detected, a message is written in the

IBM System x3850 X5 Specifications

General

Processor Cores	Up to 10 cores per processor
Chipset	Intel 7500
Hard Drive Interface	SAS/SATA
Processor	Intel Xeon E7-4800 series, Intel Xeon E7-8800 series
Memory Slots	64 DIMM slots
Storage	Up to 16 x 2.5" hot-swap SAS/SATA HDDs or SSDs
RAID Support	RAID 0, 1, 5, 6, 10
Network Interface	Integrated Gigabit Ethernet
Operating System Support	Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware vSphere
Form Factor	4U Rack