ICD NeoGCP i7 PLUS+ - Page 3

REV. N
NeoGCP i7 PLUS+
- 3 -
- This manual can be applied to NeoGCP i7 PLUS Ver. 5.05 and up. (Some functions 3.13 and up)
- Contact us for old version manuals.
Firmware
Version
Application
Manual Version
Changes
3.05a
Rev. H
3.06
Rev. I
- Protection setup change of OCR and OCGR
(Constant, Inverse, Instant added)
- Inverse Characteristics Curve changed
- Power factor display upgraded
- 1P2W added
4.00
Rev. K
- Ext-Module EP20 function added, ECU type setup added
4.06~
(3.13~)
Rev. L
- Protection function change of OVR, OCR, OCGR
- SVR added
- IDLE TIME setup possible up to 600[s]
5.06~
(3.13~)
Rev. N
- Setting/Breaker Type: MC added, ACB open delay added
- Added CoolDown function in manual operation
- Check -> subdivided into RPM check, OPG check, and OPS
check
- Governor Delay: changed from 0~90sec to -60~60sec.
(-) time is output before the starter motor
- Added User Timer Input(in DI) and C_User Timer (in DO)
- For ECU Type engine, NeoGCP g7 model is recommended