Why does the Ice PegasusHS Printer calibration fail?
A failed calibration on your Ice Printer might occur if the ribbon is installed incorrectly, the ribbon reel diameter is out of range, or the cassette is damaged. Try reinstalling the ribbon, using the correct ribbon reel, or checking for damage to the cassette base plate.
How to fix 'Cassette Open' error on Ice PegasusHS?
If you are getting a 'Cassette Open' error on your Ice Printer, it could be due to several reasons: the cassette is not fully seated, the cassette latch is out of adjustment, the cassette sensor is faulty, or the home switch magnet is missing. Try pushing the cassette in until you hear a 'click', adjusting the cassette latch, replacing the printhead sensor, or replacing the magnet.
Explains warning and caution symbols and their importance.
Covers ribbon installation, air pressure, connections, and general configuration.
Understanding and implementing password protection for user access levels.
Procedures for replacing fuses, power supply, PCB, and LCD.
Instructions for replacing flash card, main PCB, peel roller, printhead, and cassette rollers.
Process for upgrading the printer's operating software.
Table of error codes, interface messages, and their status.
Comprehensive guide for diagnosing and resolving printer issues.
To Next Page
General