Icom IC-705 - Selecting the Operating Band; Selecting the Operating Mode; Operating Mode Selection List; Selecting the Data Mode

Mode key Operating mode
[SSB] USB LSB
[CW] CW CW-R
[RTTY] RTTY RTTY-R
[AM] AM
[FM] FM
[DV] DV
[WFM] WFM
[DATA]
LSB LSB-D
USB USB-D
AM AM-D
FM FM-D
3-2
BASIC MANUAL
BASIC OPERATION
3
3
Selecting the operating band
Do the following steps to change the operating
band.
1. Touch the MHz digits. (Example: 14)
• Opens the BAND STACKING REGISTER
screen.
2. Touch a band key. (Example: 21)
• Displays a 21 MHz frequency.
TIP: About the Band Stacking Register
The Band Stacking Register provides 3
memories for each band. When you change the
operating band or the Register, the previously
operated frequency and mode are stored.
To display the Band Stacking Register contents:
z Touch the band key for 1 second in step 2.
z Touch the MHz digits for 1 second on the
standby screen.
LTouch to return to the previous screen.
Selecting the operating mode
You can select between the SSB (LSB/USB),
SSB data (LSB-DATA/USB-DATA), CW, CW
reverse, RTTY, RTTY reverse, AM, AM data
(AM-DATA), FM, FM data (FM-DATA), WFM,
and DV modes.
1. Touch the mode icon (Example: USB).
• Opens the MODE screen.
2. On the MODE screen, touch the desired
mode key. (Example: CW).
LIn the SSB, AM, or FM modes, the [DATA] key
is displayed.
LIn the DV mode, the [GPS] key is displayed.
When the GPS TX mode is selected,
is
displayed on the operating mode indicator.
Operating mode selection list
LTouch mode key to select the operating mode.
Selecting the Data mode
You can operate data communications (SSTV,
RTTY (AFSK), PSK31, JT65B, and FT8).
LWhen a data mode is selected, you can mute the
input from the microphone.
»
SET > Connectors > MOD Input
> DATA MOD