Icom IC-705 - RTTY Shift Width; RTTY Keying Polarity; SPEECH Language; SPEECH Speed

8-5
BASIC MANUAL
8
SET MODE
Function
»
SET > Function
RTTY Shift Width (Default: 170)
Selects the RTTY shift width.
LWhen the internal RTTY decoder is used, 170 Hz
is automatically selected.
RTTY Keying Polarity (Default: Normal)
Selects the RTTY keying polarity.
• Normal: Key open/close = Mark/Space
• Reverse: Key open/close = Space/Mark
»
SET > Function > SPEECH
SPEECH Language (Default: English)
Sets the speech language to English or Japanese.
Alphabet (Default: Normal)
Selects the type of phonetic announcement.
SPEECH Speed (Default: Fast)
Sets the speech speed to Fast or Slow.
RX Call Sign SPEECH (Default: ON (Kerchunk))
Turns the RX Call Sign Speech function ON or
OFF for calls received in the DV mode.
RX>CS SPEECH (Default: ON)
Turns the RX>CS Speech function ON or OFF.
MIC Up/Down SPEECH (Default: OFF)
Turns the Microphone Up/Down Speech
function ON or OFF.
• OFF: The frequency or repeater call sign is
not announced.
• ON: The frequency or repeater call sign is
announced, 1 second after pushing the

In the VFO, Memory, or Call channel
mode, the frequency is announced.
When using the DR function, the
repeater call sign is announced.
S-Level SPEECH (Default: ON)
Turns the S-meter level announcement ON or OFF.
• OFF: The operating mode and the operating
frequency are announced when you
push
.
• ON: The signal strength level, the operating
mode, and the operating frequency are
announced when you push
.
MODE SPEECH (Default: OFF)
Turns the operating mode announcement ON or OFF.
• OFF: The selected operating mode is not
announced.
• ON:
The selected operating mode is
announced.
SPEECH Level (Default: 50%)
Sets the Voice Synthesizer audio output level.
»
SET > Function
[SPEECH/LOCK] Switch (Default: SPEECH/LOCK)
Selects action.
• SPEECH/LOCK: Pushing
turns ON the
Voice Synthesizer function.
Holding down turns the
Lock function ON or OFF.
• LOCK/SPEECH: Pushing
turns the Lock
function ON or OFF.
Holding down turns
ON the Voice Synthesizer
function.
Lock Function (Default: MAIN DIAL)
This function electronically locks or the
panel display* to prevent accidental changes.
* Keys and dials are also locked except for
and
.
Memo Pad Quantity (Default: 5)
Sets the number of memo pad channels to 5 or 10.
MAIN DIAL Auto TS (Default: High)
Sets the Auto Tuning Step function for .
When rapidly rotating
, the tuning step
automatically changes according to the rotation speed.
• OFF: Auto tuning step is turned OFF.
• Low: Approximately two times faster.
• High:
Approximately five times faster when the
tuning step is set to 1 kHz or smaller.
Approximately two times faster when
the tuning step is set to 5 kHz or larger.
MIC Up/Down Speed (Default: Fast)
Selects the steps per second when changing
an operating frequency by holding down the

• Slow: Low speed (25 tuning steps/second)
• Fast: High speed (50 tuning steps/second)