Icom IC-705 - Others; Voltage; Version; Clone Mode

8-23
BASIC MANUAL
8
SET MODE
»
SET > Others > Reset
Partial Reset
Resets operating settings to their default values
(VFO frequency, VFO settings, menu contents)
without clearing the items below:
• Memory channel contents
• Keyer memory contents
• RTTY memory contents
• Call sign memories
• Message contents
• DTMF memory contents
• GPS memory contents
• Repeater list contents
• WLAN settings
• REF Adjust
• User Band Edges
• Fixed Edges
• Allowed call sign list contents
• Bluetooth pairing list
• Opening picture
LSee page 10-2 for details.
All Reset
Clears all data and returns all settings to their
factory defaults.
Memory channel contents, filter setting, and so
on will all be cleared, so you will need to rewrite
your operating settings.
LSee page 10-2 for details.
Others
»
SET > Others > Information
Voltage
Displays the battery voltage of the attached Li-
ion battery pack or external power source.
LWhen you attach the Li-ion battery pack, the
charge status of the battery pack and the battery
voltage are displayed.
Version
Displays the transceiver firmware’s version number.
MAC Address
Displays the transceiver’s MAC address.
»
SET > Others > Clone
Clone Mode
Selects to enter the clone mode to read or write
the CS-705 data from or to the PC.
LRestart the transceiver to cancel the clone mode.
»
SET > Others
Touch Screen Calibration
Touch to adjust the touch screen.
LSee the Advanced Manual for details.