Icom IC-705 - GPS Logger Function; About the Log File

7-2
BASIC MANUAL
GPS OPERATION
7
7
GPS Logger function
The GPS Logger function enables you to save
the location data from a GPS receiver onto a
microSD card as a log.
The GPS Logger saves Latitude, Longitude,
Altitude, Positioning state, Course, Speed,
Date, and Time.
If you use this GPS Logger while traveling,
you can check your trip history on a mapping
software.
About the log file
If you have the log file imported to a mapping
software, you can display your route as you
move on the software map.
LThe log files may not be compatible with all
mapping software.
LSee the Advanced Manual for details on copying
the log files onto your PC.
NOTE:
• The GPS logger function requires a microSD
card (User supplied). (p. 6-1)
• This function is turned ON as the default setting.
Therefore when you insert a microSD card, this
function continuously saves the location data
from the GPS receiver, even if you turn OFF the
transceiver, then ON again.
• You can turn this function ON or OFF in the
following item.
»
GPS > GPS Logger > GPS Logger
• When the microSD card is full, this function will
automatically be paused.