Icom IC-905 - Page 112

9
GPS OPERATION (ADVANCED)
9-35
GPS SET
»
GPS
GPS Position
Your current position, received position, or GPS
Memory Alarm position information is displayed.
(p. 9-3)
Rotating
selects the MY, RX, MEM, and
ALM screens.
MY screen (MY Position)
Compass* Displays your direction.
Latitude Displays your latitude.
Longitude Displays your longitude.
GL
Displays the grid locator based on
the latitude and longitude of your
location.
ALT Displays your own altitude.
SPEED
Displays your speed over the
ground.
TIME
Displays current time received from
the GPS�
COURSE Displays your direction heading.
L When “Position Input” is set to “Manual,” the screen
displays only latitude, longitude, altitude, GL (Grid
locator), and time (internal clock).
RX screen (Received position data of the other station)
Depending on the caller’s TX mode or TX format, the
displayed items and these meanings are di󰀨erent. The
following lists describe the items for each category.
No data is displayed when no position data is received
on your transceiver.
<1. When the caller’s TX mode is NMEA>
Compass*
Displays the caller’s direction from
your location.
Latitude Displays the caller’s latitude.
Longitude Displays the caller’s longitude.
GL
Displays the grid locator based on
the latitude and longitude of the
caller’s location.
ALT Displays the caller’s altitude.
DST
Displays the caller’s distance from
your location.
COURSE
Displays the caller’s direction over
the ground.
SPEED Displays the caller’s speed.
GPS Time Stamp
Displays the time that the caller
acquired the position data.
Call sign Displays the caller’s call sign.
<2. When the caller’s TX format is D-PRS Position
(Mobile station)>
Compass*
Displays the caller’s direction from
your location.
Latitude Displays the caller’s latitude.
Longitude Displays the caller’s longitude.
GL
Displays the grid locator based on
the latitude and longitude of the
caller’s location.
ALT Displays the caller’s altitude.
DST
Displays the caller’s distance from
your location.
COURSE
Displays the caller’s direction over
the ground.
SPEED Displays the caller’s speed.
Symbol
Displays the caller’s D-PRS
symbol.
SSID Displays the caller’s SSID.
GPS Time Stamp
Displays the time that the caller
acquired the position data.
Call sign
Displays the caller’s call sign (with
SSID).
* You can change the display type in the QUICK MENU
screen.