10
D-STAR OPERATION (BASIC)
10-15
About Reflectors
D Requesting repeater information
When you send the repeater information command,
an ID message is sent back�
1� Touch “TO” to select, and then touch “TO” again�
2� Touch “Reflector�”
3� Touch “Repeater Information�”
• Returns to the DR screen, and “Repeater
Information” and “I” are displayed in “TO�”
4� Hold down [PTT] to transmit the repeater
Information command�
5� Release [PTT] to hear the repeater ID message�
Updating the repeater list
For easy operation, a repeater list is preloaded into
your transceiver�
You can download the repeater list from the Icom
website�
NOTE:
• Before using an SD card, see the Basic manual for
details of a card�
• See “Updating the repeater list” that can be downloaded
from the Icom website about how to update the repeater
list using an SD card�
https://www.icomjapan.com/support/
To Next Page
Loading...
