Icom IC-905 - D When Connecting Your Device to the Internet Using a Cellular System

12
ABOUT THE DV GATEWAY FUNCTION
12-9
Setting up a network
A Global IP address is required to use the DV
Gateway function�
A Global IP address
A static or dynamic IPv4 Global IP address assigned to your Windows or Android device is needed�
Ask your cellular system company to provide a Global IP address to your device�
NOTE:
• Turn OFF your Wi-Fi setting when you operate using a cellular system�
• Communication errors may occur when using a cellular system�
• Depending on your contract, you may be charged a large or additional communication fee� Ask your cellular service provider
about the content of your contract�
 When using a Windows device, go to “Setting up the RS-MS3W�” (p� 12-13)
 When using an Android device, go to “Setting up the RS-MS3A�” (p� 12-14)
D When connecting your device to the Internet using a cellular system
INTERNETINTERNET
USB cable
USB cable
*
1
*
2
*
1
You can use a cellular system compatible computer�
*
2
Needs a Global IP address�
*
2