1
ADVANCED OPERATIONS
1-7
Operating CW (ADVANCED)
D Keyer Set menu (CW-KEY SET)
In this screen, you can set the memory keyer repeat
time, dash weight, paddle specications, key type,
and so on�
1� Display the CW-KEY SET screen in the CW
mode�
»
KEYER > EDIT/SET > CW-KEY SET
2� Touch the item to set� (Example: Side Tone Level)
3� Touch the option to set� (Example: 80%)
4� To close the CW-KEY SET screen, push �
TIP: You can set each item to its default by touching
the item for 1 second, and then touching “Default” on
the QUICK MENU screen�
Dot/Dash Ratio (Default: 1:1:3�0)
Sets the dot/dash ratio�
• Set to between 1:1:2�8 ~ 1:1:4�5 in 0�1 steps�
Keying weight example: Morse code “K”
Rise Time (Default: 4ms)
Sets the rise time of the transmitted CW envelope�
• Set to 2, 4, 6, or 8 milliseconds�
Paddle Polarity (Default: Normal)
Sets the paddle dot-dash polarity to Normal or
Reverse�
• Normal: Right = dash, Left = dot
• Reverse: Right = dot, Left = dash
Key Type (Default: Paddle)
Sets the key type for the [ELEC-KEY] jack on the side
panel�
• Set to Straight, Bug, or Paddle�
L When using an external Elec-keyer, select “Straight�”
MIC Up/Down Keyer (Default: OFF)
Selects whether or not to use the keys on the
microphone as a CW key�
• OFF: Do not use the microphone keys as a
CW key�
• ON (UP/DOWN):
Use the [▲]/[▼] keys as a CW key.
• ON (A/B): Use the [A]/[B] keys as a CW key�
L The microphone keys do not work as a “squeeze key�”
L When “ON” is selected, you cannot use the function that
is assigned to each key�
Side Tone Level (Default: 50%)
Adjusts the CW side tone output level�
• Adjust to between 0 ~ 100%�
Side Tone Level Limit (Default: ON)
Turns the CW side tone level limit ON or OFF� This
function disables the CW side tone when you increase
AF GAIN above the side tone level�
Keyer Repeat Time (Default: 2sec)
Sets the time between Memory keyer transmissions�
• Set to between 1 ~ 60 seconds�
L After transmitting a Memory keyer contents, the
transmission is repeated after the set time period�
L
is displayed, even between transmissions�
1 1 2�8～4�5
Default: 1:1:3
Setting range
1:1:2�8 to 1:1:4�5
Setting range Space
Dot Dash Dash
Key action
TX output
power
Rise time
Set TX output power
Time
To Next Page
Loading...
