Icom IC-905 - D Home CH Beep Function; D Home Channel Setting; D Selecting the DTMF Transmit Speed; Home Channel Function

8
OTHER FUNCTIONS
8-9
Transmitting the DTMF code
Home Channel function
D Selecting the DTMF transmit speed
1� Display the DTMF screen�
»
DTMF
2� Touch [SET]�
3� Touch “DTMF Speed�”
4� Touch the option to set� (Example: 300ms)
• 100ms: Transmits the DTMF tones at about 100
milliseconds per code (5 characters per
second)�
• 200ms: Transmits the DTMF tones at about 200
milliseconds per code (2�5 characters per
second)�
• 300ms: Transmits the DTMF tones at about 300
milliseconds per code (1�6 characters per
second)�
• 500ms: Transmits the DTMF tones at about 500
milliseconds per code (1 character per
second)�
5� To close the DTMF SET screen, push �
Home Channels are often-used frequencies you can
be preset in the transceiver’s VFO mode, Memory
mode, and DR screen�
D Home Channel setting
Example: In the VFO mode
1� Select a mode (VFO or Memory) or the DR screen
in which you want to set the Home Channel�
2� Select a frequency, channel, or a repeater to be
set as the Home Channel�
L On the DR screen, select “FROM�”
3� Push �
4� Touch “Home CH Set�”
5� Touch “Set Frequency�”
L In the Memory mode, touch “Set Channel�” On the
DR screen, touch “Set Repeater�”
TIP: Touching “Clear” in Step 5 clears the Home
Channel setting�
D Home CH Beep function
When the set Home Channel is selected, a beep
sounds. You can conrm the Home Channel selection
without looking at the display�
L You can turn OFF the Home CH Beep function�
»
SET > Function > Home CH Beep