3
SD CARD (ADVANCED)
3-4
Importing or Exporting a CSV format le
Please read this section before importing or exporting
a Comma Separated Values (CSV) format le from the
SD card.
You can import or export the following data:
• Memory CH
• Your Call Sign Memory
• Repeater List
• GPS Memory
NOTE:
• Before importing, make a backup le of all the
transceiver’s data to the SD card in case of data loss.
• The transceiver cannot display a le that has a le name
longer than 24 characters. In this case, rename it using
23 characters or less. When you export the data in a
CSV format le using the CS-905, BE SURE to name it
using 23 characters or less.
D Importing
1� Open the IMPORT/EXPORT screen.
»
SET > SD Card > Import/Export
2� Touch “Import.”
3� Touch the data to import.
(Example: Your Call Sign)
4� Touch the CSV file to import.
TIP: When importing a repeater list, “Keep
‛SKIP’ settings in Repeater List?” is displayed.
See step 6 on page 3-2 for details.
5� Touch [YES].
• After the importing ends, “COMPLETED! Restart the
IC-905.” is displayed.
6� Turn OFF the transceiver, then turn it ON again to
restart the transceiver.
To Next Page
Loading...
