Icom IC-905 - Setting the transceiver

13
DD MODE OPERATION
13-3
Setting your PC
Step 2. Setting the computer information
Enter the computer name, workgroup name and
computer description�
L Enter the same workgroup in both PCs�
L You may not need to enter them, depending on your PC
environment�
Step 3. Setting the shared folder
L Ask your PC’s manufacturer about the setting details�
Setting the transceiver
D Connecting a LAN cable
Connect the PC to the [LAN] port on the controller
using a LAN cable (User supplied)�
L The IC-905’s network setting is not required�
To the [LAN] port
IC-905
PC
LAN cable
(User supplied)
D Selecting your call sign
Select your call sign for DD mode operation�
You can select a di󰀨erent call sign for DD mode
operation from the one you use for DV mode
operation�
L You do not have to change the call sign setting if you use
the same one you use for DV mode operation�
1� Open the MY CALL SIGN (DD) screen�
»
SET > My Station > My Call Sign (DD)
2� Touch the call sign that you use for DD mode
operation� (Example: JA3YUA /DD)
3� To close the MY STATION screen, push
several times�