7
SCANS
7-3
Display the SCAN screen�
»
SCAN
VFO mode
Memory mode
Key Action
PROG
Touch
Starts or cancels a Programmed
scan�
Touch for
1 second
Displays the SCAN SELECT
screen�
MEMO
Touch Starts or cancels a Memory scan�
Touch for
1 second
Displays the SCAN SELECT
screen�
∂F Starts or cancels a ∂F scan�
FINE
While Programmed scanning, touch to switch
to the Fine Programmed scan�
While ∂F scanning, touch to switch to the
Fine ∂F scan�
L In the Memory mode, this key is displayed
when a ∂F scan is started�
SELECT
Touch
Selects a Memory channel (except
C1 and C2) to set as a Select
Memory channel�
• “★1,” “★2,” “★3,” or “(no icon)”
Touch for
1 second
Displays the SELECT ALL CLEAR
screen�
SEL No�
Selects the Select scan number for the
Select Memory scan�
• “★1,” “★2,” “★3,” or “★1,2,3”
∂F SPAN
Selects a ∂F span�
• ±5�0 kHz, ±10 kHz, ±20 kHz, ±50 kHz, ±100
kHz, ±500 kHz, or ±1 MHz
SET Displays the SCAN SET screen�
RECALL
Touch for
1 second
Sets the operating frequency to
the frequency displayed on this
key�
SCAN screen
� Push to display the SCAN SELECT screen�
L If you push while scanning, the scan is
canceled�
� Hold down for 1 second to start the
previously selected scan�
To Next Page
Loading...
