Icom IC-905 - Selecting a Memory channel

6
MEMORY OPERATION
6-3
Selecting a Memory channel
There are 3 ways to select a Memory channel�
• Selecting with
• Selecting on the MEMORY screen
• Selecting using the keypad (Basic manual)
D Selecting with
1� Select the Memory mode� (Basic manual)
2� Assign the Select Memory Channel function to
� (Basic manual)
3� Rotate until you select the Memory
channel you want to use�
TIP: To sequentially select a channel in a
di󰀨erent group
1� Push �
2� Touch “Channel Select Group Range�”
3� Touch “All Group�”
D Selecting on the MEMORY screen
1� Select the Memory mode� (Basic manual)
2� Open the MEMORY GROUP screen�
»
MEMORY
3� Touch a Memory group� (Example: 00)
4� Touch the Memory channel that you want to use�
Selecting a Call channel
1� Select the operating band� (Basic manual)
2� Push to select the Call Channel mode�
3� Rotate to select the Call channel that you
want to use�
Call Channel mode
Memory mode
(Example: channel 00 in group 00)