Icom IC-905 - D Transmitting an RTTY Memory Content

1
ADVANCED OPERATIONS
1-9
Operating RTTY (FSK)
D Transmitting an RTTY memory content
You can transmit the preset characters on the RTTY
MEMORY screen�
L You can edit the contents by touching [EDIT] on the RTTY
MEMORY screen�
1� Display the RTTY DECODE screen in the RTTY
mode�
»
DECODE
2� Touch [TX MEM]�
3� Touch an RTTY memory between [RT1] and [RT8]
to transmit� (Example: RT1)
Memory Preset characters by default
RT1
↵ DE ICOM ICOM K ↵
RT2
↵ DE ICOM ICOM ICOM K ↵
RT3
↵ QSL UR 599–599 BK ↵
RT4
↵ QSL DE ICOM ICOM UR 599-599 BK ↵
RT5
↵ 73 GL SK ↵
RT6
↵ CQ CQ CQ DE ICOM ICOM ICOM K ↵
RT7
↵ MY TRANSCEIVER IS IC–905 & ANTENNA
IS A PARABOLIC DISH� ↵
RT8
↵ MY RTTY EQUIPMENT IS INTERNAL FSK
UNIT & DEMODULATOR OF THE IC–905� ↵
When an external keypad is connected:
You can transmit the preset contents in the RTTY
memory (RT1 ~ RT8) from an external device by
setting the “External Keypad,” and then connecting
an external keypad to the [ELEC-KEY] jack on the
IC-905�
»
SET > Connectors > External Keypad
• The TX status indicator lights red and the Po meter
swings�
L To cancel the transmission and to return to the RTTY
DECODE screen, push
�
L After transmitting, automatically returns to receive�
Transmitting
Transmitting contents are displayed�