Icom IC-905 - D RTTY DECODE LOG SET Screen

1
ADVANCED OPERATIONS
1-12
Operating RTTY (FSK)
D RTTY DECODE LOG SET screen
In this screen, you can set the log le type, time stamp
setting, and other RTTY settings�
1� Display the RTTY DECODE LOG screen�
»
DECODE > <1> > LOG
2� Touch “Log Set�”
3� Touch the item to set� (Example: File Type)
4� Touch the option to set� (Example: HTML)
5� To close the RTTY DECODE LOG SET screen,
push several times�
TIP: You can set each item to its default by touching
the item for 1 second, and then touching “Default” on
the QUICK MENU screen�
File Type (Default: Text)
Selects the le type to save a log onto an SD card
from Text and HTML�
L You cannot change the le type while logging.
Time Stamp (Default: ON)
Selects whether or not to add the time stamp (date,
transmission time, and reception time) in the log�
• ON: Adds the time stamp in the log�
• OFF: Does not add the time stamp�
Time Stamp (Time) (Default: Local)
Selects whether to save the log with the local time or
with the UTC time�
Time Stamp (Frequency) (Default: ON)
Selects whether or not to add the frequency in the log�
• ON: Adds the frequency�
• OFF: Does not add the frequency�