6
MEMORY OPERATION
6-5
Entering a Memory group/Memory channel name
You can assign a name of up to 16 characters to
each Memory group (00 ~ 99) and to each Memory
channel�
D Entering a Memory group name
1� Open the MEMORY GROUP screen�
»
MEMORY
2� Touch the Memory group that you want to assign
a name to, for 1 second� (Example: 01)
3� Touch “Edit Name�”
4� Enter a group name, then touch [ENT]�
5� To close the MEMORY GROUP screen, push
�
D Entering a Memory channel name
1� Open the MEMORY GROUP screen�
»
MEMORY
2� Touch the Memory group that contains the desired
memory channel� (Example: 01)
3� Touch of the channel that you want to assign a
name to� (Example: channel 01)
4� Touch “Edit Name�”
5� Enter a name, then touch [ENT]�
6� To close the MEMORY screen, push several
times�
L The Memory channel name is not displayed when the
Mini Scope screen or expanded screen is displayed�
L You can also select not to display the Memory name
on the standby screen�
»
SET > Display > Memory Name
Memory channel
name
To Next Page
Loading...
