Icom IC-905 - Register your call sign at a gateway repeater

10
D-STAR OPERATION (BASIC)
10-5
Register your call sign at a gateway repeater
To make a Gateway call through the Internet, you
must register your call sign at a repeater that has a
gateway, usually one near you�
About the registration process described:
This section describes the call sign registration
process at a repeater that is connected to the US
Trust server�
There are other systems as well, and they have their
own registration process� For information on how to
register on one of them, contact the administrator of
a repeater that uses the alternate system�
NOTE: If needed, ask the gateway repeater
administrator for call sign registration instructions�
Step 1. Access the call sign registration screen
1� Access the following URL to find the gateway
repeater closest to you�
http://www�dstarusers�org/repeaters�php
2� Click the call sign of the repeater that you want to
register to�
3� Click the “Gateway Registration URL:” link
address�
• The “D-STAR Gateway System” screen is displayed�
4� Click <Register> to start the New User
registration�
Click
Step 2. Register your call sign
1� Follow the registration instructions found there�
2� When you receive a notification from the
administrator, your call sign registration has been
approved�
NOTE: It may take a few days for the administrator
to approve you�
Step 3. Register your personal information
After your registration is approved, log in your
personal account with your registered call sign and
password�
Click
Step 4. Register your D-Star equipment
1� Register your D-STAR equipment information�
Ask the gateway repeater administrator for details�
2� When your registration is complete, log out of your
personal account, and start using the D-STAR
network�
NOTE: You must register your D-STAR equipment
BEFORE you can make Gateway Repeater calls�