5
VOICE TX MEMORY FUNCTION
5-2
Recording a Voice TX memory
SSB, AM, FM, DV, and ATV modes
You can record up to 8 Voice transmit (TX) memories
(T1 ~ T8) onto an SD card� To transmit a recorded
content using a Voice TX memory, rst record the
message, as described below�
L You can record up to 1 and a half minutes in each
memory�
L You can also transmit the recorded content using an
external keypad�
NOTE: To use the Voice TX memory function, an SD
card (user supplied) is required�
D Recording
1� Display the VOICE TX screen�
»
VOICE
2� Touch [REC/SET]�
3� Touch “REC�”
• Opens the VOICE TX RECORD screen�
4� Touch the desired Voice memory “T1” ~ “T8�”
(Example: T1)
5� Touch to start recording�
• Without holding down [PTT], speak into the
microphone at your normal voice level�
L Previously recorded content is overwritten�
6� Touch to stop recording�
7� To close the VOICE TX RECORD screen, push
several times�
TIP: How to clear the recorded content
Touch the Voice TX memory for 1 second in step 4,
and then touch “Clear” in the QUICK MENU screen�
Adjust the Mic gain so that the “REC
Level” meter reads less than 80%�
Displayed while
recording
Touch to open the MIC GAIN
adjustment window�
To Next Page
Loading...
