11
D-STAR OPERATION (ADVANCED)
11-18
Automatic Reply function
When a call addressed to your own call sign is
received, the Automatic Reply function sounds beeps
and automatically replies with your call sign.
(Default: OFF)
Depending on the setting, a recorded message may
be transmitted with the call sign.
1. Open the “Auto Reply” screen.
»
SET > DV/DD Set > Auto Reply
2. Touch an option.
• ON: Automatically replies with your own call sign. (No
audio reply is sent)
• Voice: Automatically replies with your call sign and an
Auto Reply message recorded on the SD card
(up to 10 seconds).
L If no card is inserted, or no message is
recorded, replies with only your own call
sign (No audio reply is sent).
3. To close the DV/DD SET screen, push
several times.
Auto Reply icon
• Returns to the standby screen, and displays the Auto
Reply icon.
L When “ON” or “Voice” is selected, the Automatic
Reply function is automatically turned OFF, when you
push [PTT].
Example: After receiving a call from “JM1ZLK,” beeps
sound and the transceiver automatically
sends a reply call.
The “TO” setting does not change, but “UR:
JM1ZLK (Caller’s call sign)” is displayed.
NOTE: The Automatic Reply function temporarily
sets the received call sign to “TO” (destination).
TIP: To record the Auto Reply message
You can record the Auto Reply message. See page
11-19 for details.
»
2 > DV A-RPLY
To Next Page
Loading...
