Icom IC-905 - Your Call Sign

11
D-STAR OPERATION (ADVANCED)
11-34
Your Call Sign
D Entering a Your Call Sign
You can manually enter a Your (destination) Call Sign.
When a Your Call Sign is set to “TO,” you can make a
call to the station, even if you do not know where the
station is currently located.
Up to 300 “Your Call Signs” can be entered.
Example: Entering “Rick/JM1ZLK” to the Your Call
Sign memory.
1. Open the YOUR CALL SIGN screen.
»
2 > DV/DD MEMORY > Your Call Sign
2. Push
.
3. Touch “Add.”
4. Touch “ NAME.”
5. Enter a station name of up to 16 characters, and
then touch [ENT].
6. Touch “CALL SIGN.”
7. Enter a call sign of up to 8 characters, including
spaces, and then touch [ENT].
8. Touch “<<Add Write>>.”
• The conrmation dialog is displayed.
9. Touch [YES].
10. To close the YOUR CALL SIGN screen, push
several times.
TIP:
To cancel the entered call sign
Push , then the “Cancel edit?” window is
displayed. Touch [YES] to cancel the entry and
return to the YOUR CALL SIGN screen.
To edit the entered call sign
Touch “Edit” in step 3.