Icom IC-R8600 - Digital Squelch Modes (COM ID, RAN, UC); Descrambler and Decryption Functions

5
OTHER FUNCTIONS
5-10
Descrambler function
Decryption function
dPMR mode
You can descramble the scrambled dPMR (Tire2)
communication by entering the appropriate key.
• Settable range: 1 ~ 32767
1. Touch [SCRAM] on the FUNCTION screen.
• Each touch turns the function ON or OFF.
2. To change the descramble key, touch [SCRAM]
for 1 second.
• Opens the SCRAMBLER (dPMR) screen.
3. Rotate to set the key.
• Touch [EDIT] to enter using the keypad.
L The setting is stored in each memory channel.
NXDN-vn, NXDN-n and DCR modes
You can decrypt the encrypted NXDN or DCR
communication by entering the appropriate key.
• Settable range: 1 ~ 32767
1. Touch [ENCRYP] on the FUNCTION screen.
• Each touch turns the function ON or OFF.
2. To change the decrypting key, touch [ENCRYP]
for 1 second.
• Opens the ENCRYPTION screen.
3. Rotate to set the key.
• Touch [EDIT] to enter using the keypad.
L The setting is stored in each memory channel.
D Group Code (COM ID) and CC
dPMR mode
The squelch opens only when you receive a dPMR signal
that includes a matching COM ID (Common ID) or CC.
• Settable range: 1 ~ 255 (COM ID), 0 ~ 63 (CC)
1. Touch [D.SQL] on the FUNCTION screen.
• Each touch changes between [COM ID], [CC] or [OFF].
2. To change the COM ID or CC, touch [D.SQL] for
1 second.
• Opens the DIGITAL SQL (dPMR) screen.
3. Touch [COM ID] or [CC] then rotate to
set the ID or code.
L The settings are stored in each memory channel.
D Radio Access Number (RAN)
NXDN-vn and NXDN-n modes
The squelch opens only when you receive a NXDN
signal that includes a matching RAN.
• Settable range: 0 ~ 63
1. Touch [D.SQL] on the FUNCTION screen.
• Each touch turns the function ON or OFF.
2. To change the number, touch [D.SQL] for 1 second.
• Opens the DIGITAL SQL (NXDN) screen.
3. Rotate to set RAN.
L The setting is stored in each memory channel.
D.SQL (Digital Squelch) (Continued)
Touch for 1 second to reset
to the default setting.
Touch for 1 second to reset
to the default setting.
Resets to the default setting.
Enter using the keypad
Resets to the default setting.
Enter using the keypad
ENCRYPTION KEY screen
(Example: NXDN)
D User Code (UC)
DCR mode
The squelch opens only when you receive a DCR
signal that includes a matching UC.
• Settable range: 1 ~ 511
1. Touch [D.SQL] on the FUNCTION screen.
• Each touch turns the function ON or OFF.
2. To change the number, touch [D.SQL] for
1 second.
• Opens the DIGITAL SQL (DCR) screen.
3. Rotate to set UC.
L The setting is stored in each memory channel.