Icom IC-R8600 - Digital Mode Settings

11-4
Function (Continued) Digital Set (Continued)
Screen Capture File Type (Default: PNG)
Selects the le format for the Screen Capture function.
• Options: PNG or BMP
Keyboard Type (Default: Full Keyboard)
Sets the keyboard entry type to Ten-key or Full
Keyboard.
• Ten-key: Ten-key type
• Full Keyboard: Full Keyboard type
L You can enter upper case letters, lower
case letters, numbers, some symbols
and spaces with this type.
L When the edit screen is displayed, push to open
the QUICK menu and select the desired keyboard type.
REF Adjust
Calibrates the internal reference frequency (10 MHz).
• Range: 0 ~ 100%
Digital Set
MENU
» SET > Digital Set
Digital Monitor (Default: Auto)
Selects the receive mode when
is pushed in
the DIGITAL mode.
• Auto: Receives in the DIGITAL mode or the FM
mode, depending on the received signal.
• Digital: Receives in the DIGITAL mode.
• Analog: Receives in the FM mode.
Digital Mode Select (Default: (All modes selected))
Selects the DIGITAL mode options. Only checked modes
are displayed as the option on the [MODE] screen.
• Options: D-STAR, P25, dPMR, NXDN-n, NXDN-vn
and DCR
RX History Log > RX History Log (Default: OFF)
You can store the Received Call logs on to an SD card
in CSV format.
• OFF: Does not store the log.
• ON: Stores the logs.
RX History Log > CSV Format > Separator/Decimal
(Default: Sep [,] Dec [.])
Selects the separator and the decimal character for
the CSV format.
• Sep [,] Dec [.]: Separator is “,” and Decimal is “.”
• Sep [;] Dec [.]: Separator is “;” and Decimal is “.”
• Sep [;] Dec [,]: Separator is “;” and Decimal is “,”
L The default value differs, depending on the receiver
version.
RX History Log > Date >
Date (Default: yyyy/mm/dd)
Selects the date format between “yyyy/mm/dd,” “mm/
dd/yyyy” and “dd/mm/yyyy.” (y: year, m: month, d: day)
L* The default value may differ, depending on the receiver
version.
D-STAR Standby Beep (Default: ON)
Turns the Standby Beep function ON or OFF.
• OFF: Turns OFF the function.
• ON: Sounds a beep after a received signal
disappears, in the DV (D-STAR) mode.
D-STAR Auto Detect (Default: OFF)
Turns the DV (D-STAR) mode Automatic Detect
function ON or OFF.
• OFF: Turns OFF the function. The receive mode is
xed to the DV mode.
• ON: Automatically and temporarily switches to the
FM mode, when an FM signal is received in
the DV mode.
RX Record (D-STAR RPT) (Default: All)
Records the received call history when a DV (D-STAR)
signal is received.
• ALL: Records up to 50 calls.
• Latest Only: Records only the last call.
D-STAR EMR AF Level (Default: 20%)
Set the audio output level for when an EMR (Enhanced
Monitor Request) communication signal is received in
the DV (D-STAR) mode.
Range: 0 ~ 100%
L When an EMR signal is received, the audio will be heard at
the set level, or the [AF GAIN] level, whichever is higher.
LTo disable the setting, set it to “0%.”
11
SET MODE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21