Icom IC-R8600 - Clock and Timer (Continued)

10-3
Timer Status (Default: OFF)
Turns this timer slot ON or OFF. Set to ON to activate
the Timer.
L is displayed in the slot while the Timer is activated.
Reservation Timer (Default: 00:00)
Sets the time to turn ON the power in the 24-hour clock.
L If you use the Timer to turn OFF the power, push
then touch [Clear] to clear the Reservation Timer.
Power OFF Timer (Default: --:--)
Sets the time to turn OFF the power in the 24-hour clock.
L If you use the timer to turn ON the power, push
then touch [Clear] to clear the Power OFF Timer.
Reservation Channel (Default: ----)
Selects the memory channel number that is displayed
on start up. When Reservation Timer is set to ON, the
IC-R8600 starts with the selected memory channel.
L You can select any memory channel except blank one.
L If you want to start with currently selected memory
channel, push
then touch [Clear].
L Even if the receiver power is ON, the currently selected
memory channel is automatically changed to the selected
memory channel.
Day of the Week (Default: ---)
Selects the day of the week to activate the Timer
every week.
• If you want to activate the Timer everyday, push
then touch [Clear].
Repeat Setting (Default: OFF)
Selects the timer repeat option.
• OFF: The timer activates only once.
( The Timer Status item is automatically reset to
"OFF," after the Timer has been activated.)
• ON: The Timer activates everyday, or every week
if a day of the week is selected.
L is displayed in the slot when "ON" is selected.
<<Set>>
Touch to store the timer settings and starts the Timer.
Timer (continued)
D About the Timer recording
You can start the recording using the Timer.
z Start the recording then turn OFF the power.
• When the IC-R8600 is turned on by the Timer, the
recording is automatically starts, according to the preset
recording setting (p. 6-4).
D Timer setting items
NOTE:
If you set the Power OFF timer earlier than Reservation
Timer, the receiver will not automatically turn OFF.
For example, if Reservation Timer is set to "8:00" and
Power OFF timer is set to "7:30," the receiver will not
automatically turn OFF.
10
Clock and Timer
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21