Icom IC-R8600 - SET MODE; Set Mode Navigation and Description

11-1
Set mode description
D Entering the Set mode
1. Push
MENU
.
• Opens the MENU screen.
2. Touch [SET].
3. Rotate to select the desired item.
4. Push to go to the next tree level.
L You can also go to the next tree level by directly
touching the desired item in the screen.
LTo go back the previous tree level, push
EXIT
.
5. Repeat steps 3 and 4 to open the desired item’s
setting screen.
You can use the Set mode to set infrequently changed
values or function settings.
TIP: The Set mode is constructed in a tree structure.
You may go to the next tree level, or go back a level,
depending on the selected item.
6. Rotate to select the desired option, and
then push to set it.
InformationL
• You can also select the option by directly touching the
option or [▲/+] or [▼/–] on the screen.
• To continue setting other items in the same tree level,
repeat step 6.
• To continue setting
other items in a different tree level,
push
EXIT
to go back the previous tree level.
7. To close the SET screen, push
EXIT
several times.
TIP: How to reset to the default setting
Pushing
opens the Quick menu, and then touch
“Default” to reset to the default settings.
MENU screen
11
SET MODE