Icom IC-R8600 - Entering Group and Memory Names

8
MEMORY OPERATION
8-4
Entering a group/memory name
You can assign a name of up to 16 characters to each
channel group (00 ~ 99) and memory channel.
• You cannot change the group name of Auto MW, Skip and
scan channels (Groups "A," "S" and "P").
D Entering a group name
1. Touch the Memory channel number.
• The VFO/MEMORY screen opens.
2. Touch [GROUP].
3. Select the channel group to enter a name.
4. While the channel group is selected, touch
QUICK
.
5. Touch “Edit Name.”
• The “GROUP NAME” editing screen is displayed.
6. Enter a name of up to 10 characters.
L See “Keyboard entering and editing” (p. 1-8) for
details.
7. Touch [ENT] to save the entered name.
• The MEMORY NAME screen closes and returns to the
GROUP SELECT screen.
D Entering a memory name
1. Open the MEMORY screen.
MENU
»
MEMORY
2. Push
or to select the group.
3. Rotate to select the channel to enter a
name.
4. Touch .
5. Touch “Edit Name.”
• The “MEMORY NAME” editing screen is displayed.
6. Enter a name of up to 10 characters.
L See “Keyboard entering and editing” (p. 1-7) for details.
7. Touch [ENT] to save the entered name.
• The MEMORY NAME screen closes and returns to the
MEMORY screen.
Memory name