Icom IC-T70A - Selecting Memory Channels (Dial and Keypad)

New2001
30
6
MEMORY/CALL CHANNELS
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
■ Selecting a memory channel
D Using [DIAL]
q Push [V/M/C] to select the memory mode.
•Pushing[V/M/C] toggles between the VFO mode, the memory
channel mode, call channel mode and weather channel mode*.
* Only the U.S.A. version transceiver.
w Rotate [DIAL] to select a desired memory channel.
•Onlyprogrammedchannelsaredisplayed.
[DIAL]
Appears
Rotate [DIAL] to select
the memory channel.
D Using the Numeral keys
q Push [V/M/C] to select the memory mode.
•Pushing[V/M/C] toggles between the VFO mode, the memory
channel mode, call channel mode and weather channel mode*.
* Only the U.S.A. version transceiver.
w Use the number keys to enter 3 digits to select a desired
memory channel.
•Theblankchannelsarealsoselectable.
• Example— selecting memory channel “25”
Push [V/M/C], then push [0], [2], [5].
Appears
Numeral
keys
The entered memory
channel is selected.