Icom IC-T70A - Memory Bank Selection Process

New2001
33
6
MEMORY/CALL CHANNELS
New2001
■ Memory bank selection
q Push [V/M/C] to select the memory mode.
w Push [BAND] to enter the bank selection mode.
e Rotate [DIAL] to select a desired bank (A to Z), then push
[BAND].
•Onlyprogrammedbanksaredisplayed.
•Alsoregularmemorychannelcanbeselected.
[DIAL]
Push
Rotate
Bank channel is displayed.
Regular memory
channel
is displayed.
Push
r Rotate [DIAL] to select the bank channel.
•Onlyprogrammedchannelsaredisplayed.
[DIAL]
Bank channel is selected.