79
13
OPTIONS
New2001 New2001
•CP-12L
c i g a r e t t e l i g h t e r c a b l e w i t h n o i s e f i lt e r
•CP-19R c i g a r e t t e l i g h t e r c a b l e w i t h d c -d c c o n v e r t e r
Allows you to operate the transceiver through a 12 V ciga-
rette lighter socket. You can also charge the attached bat-
tery pack (during stand-by only).
CP-19R: A built-in DC-DC converter provides an 11 V DC
output.
• CP-23L
c i g a r e t t e l i g h t e r c a b l e
Allows charging of the battery packs through a 12 V ciga-
rette lighter socket. (For BC-191/BC-193)
•OPC-254L
d c p o w e r c a b l e
For operation and charging via an external power supply.
• OPC-515L
d c p o w e r c a b l e
Allows charging of the battery packs using a 12 V DC
power source instead of the AC adapter. (For BC-191/
BC-192/BC-193)
• AD-92SMA
a n t e n n a c o n n e c t o r a d a p t e r
Allows you to connect an external antenna with a BNC
connector.
• HM-131
s p e a k e r -m i c r o p h o n e
Combination speaker-microphone that provides convenient
operation while hanging the transceiver on your belt.
• HM-153
e a r p h o n e -m i c r o p h o n e
Ideal for hands-free operation: clip the HM-153 (with inte-
grated PTT switch) to your lapel or breast pocket.
• HS-94/HS-95/HS-97
h e a d s e t
+OPC-2006
p l u g a d a p t e r c a b l e
HS-94 : Ear hook type
HS-95 : Neck & arm type
HS-97 : Throat microphone
OPC-2006 : Allows you to connect the HS-94/HS-95/HS-97
to the transceiver. After connecting, the VOX
function can be used.
•SP-27
t u b e e a r p h o n e
Provides clear audio in noisy environments.
•OPC-474 c l o n i n g c a b l e
For transceiver-to-transceiver cloning.
•OPC-478/OPC-478UC
c l o n i n g c a b l e
Used for data cloning between transceiver and PC with
CS-T70 (cloning software).
• CS-T70
c l o n i n g s o f t w a r e
Provides quick and easy programming of such settings as
memory channels and Set modes contents via your PC’s
RS-232C terminal (using OPC-478), or USB port (OPC-
478UC). Either OPC-478 or OPC-478UC is required.
•LC-174
c a r r y i n g c a s e
Helps protect the transceiver from scratches, etc.
Approved Icom optional equipment is designed for optimal
performance when used with an Icom transceiver.
Icom is not responsible for the destruction or damage to an
Icom transceiver in the event the Icom transceiver is used with
equipment that is not manufactured or approved by Icom.